Purpose of this Manual
This document is the DT55xxE User's Manual; it contains information about the installation, the configuration and the
use of the Power Supply System.
Change Document Record
Date
Revision
Changes
18 December 2015
0
Preliminary
5 February 2016
1
Software tools updated; Technical specifications table updated
12 February 2016
2
Technical specifications table updated, Firmware upgrade
26 July 2016
3
Updated Ethernet configuration
11 October 2016
4
Updated Ethernet configuration
26 January 2017
5
Channel Status bit description
11 April 2017
6
Updated inspection and installation instructions
Symbols, abbreviated terms and notation
T.B.D.
Reference Documents
T.B.D.
Disclaimer
No part of this manual may be reproduced in any form or by any means, electronic, mechanical, recording, or otherwise,
without the prior written permission of CAEN SpA.
CAEN will repair or replace any product within the guarantee period if the Guarantor declares that the product is
defective due to workmanship or materials and has not been caused by mishandling, negligence on behalf of the User,
accident or any abnormal conditions or operations.
CAEN declines all responsibility for damages or injuries caused by an improper use of the Modules due to negligence on
behalf of the User. It is strongly recommended to read thoroughly the CAEN User's Manual before any kind of operation.
CAEN reserves the right to change partially or entirely the contents of this Manual at any time and without giving any
notice.
Disposal of the Product
The product must never be dumped in the Municipal Waste. Please check your local regulations
for disposal of electronics products.
Made In Italy
: We stress the fact that all the boards are made in Italy because in this globalized world, where getting
the lowest possible price for products sometimes translates into poor pay and working conditions for the people who
make them, at least you know that who made your board was reasonably paid and worked in a safe environment. (this
obviously applies only to the boards marked "Made in Italy", we cannot attest to the manufacturing process of "third
party" boards).
