Caen RFID R1280I, Technical Information Manual

Page: 7 / 83

INTRODUCTION - skID Technical Information Manual 7
Front panel
The skID R1280I front panel houses the following buttons (see figure below):
Fig. 1.3: Front Panel
No. Name Description
1 Trigger button
Inventory mode: press to perform an inventory cycle (hold down the button to
repeat inventory cycles)
2 Power button
Press the button to switch on the reader, press for at least 2 seconds to switch it
off
3 Antenna
Y
Antenna Position, do not cover with your hand!
Tab. 1.1: Front Panel Buttons