- Technical Information Manual
17
2)
Power on the board via power jack J1 for at least 5s.
3)
Remove the power supply.
4)
Place the jumper J9 in the original position.
5)
Check that the SW3 switch is in the USB configuration (see
6)
Connect the USB cable to the J3 connector on the board.
7)
Power on the board via power jack J1.
8)
Depending on your reader model, download the
R4320C Hadron Upgrade Tool
or
R4320CB Hadron
Upgrade Tool
and the
R4320C Hadron Firmware
or
R4320CB Hadron Firmware
at the
Warning
: pay attention to the model of your reader (R4320C or R4320CB) when downloading
the upgrade tool and the firmware
9)
Launch the R4320C/R4320CB Hadron Upgrade and click on
Next
button.
Mod. R4320C
Mod. R4320CB
Summary of Contents for Hadron R4320C
Page 34: ...HADRON R4320C FCC GRANT PART B...
Page 35: ...HADRON R4320C FCC GRANT PART C...
