CAEDEN Linea ?10, Product Manual & Warranty

Page: 62 / 76

Pairing Your Linea No10
The Linea No10 can store up to 8 Bluetooth ®
hosts at one time.
1. To power on and pair your headphones for the
first time, press and hold the
CENTER
button for
2 seconds. The
LED
will flash alternately
RED
and
BLUE
to indicate that the headset is in
pairing mode.
2. Open the Bluetooth ® settings on your
smartphone, tablet, computer or other mobile
device. Follow your device’s pairing instructions
and select the device named “Linea No10.”
3. The
LED
will blink
BLUE
twice to indicate that
the Linea No10 is paired with your device.
4. To pair your Linea No10 with another device,
start with the headset in power
OFF
mode. Hold
the
CENTER
button for 6 seconds. The
LED
will
flash alternating
RED
and
BLUE
to indicate that it
is ready to pa ir.
Note: When more than 8 hosts are paired, the oldest paired
device will be automatically dropped when a new device is
paired. You may completely clear the list of stored devices by
pressing
VOLUME UP
&
VOLUME DOWN
, while the power is on,
until the
LED
flashes
RED
&
BLUE
twice.
The Linea No10 is:
in pairing mode.
paired with your device.
×2
Linea Nº10
Linea Nº1
Linea Nº2
Pairing Your Linea No10
The Linea No10 can store up to 8 Bluetooth ®
hosts at one time.
1. To power on and pair your headphones for the
first time, press and hold the
CENTER
button for
2 seconds. The
LED
will flash alternately
RED
and
BLUE
to indicate that the headset is in
pairing mode.
2. Open the Bluetooth ® settings on your
smartphone, tablet, computer or other mobile
device. Follow your device’s pairing instructions
and select the device named “Linea No10.”
3. The
LED
will blink
BLUE
twice to indicate that
the Linea No10 is paired with your device.
4. To pair your Linea No10 with another device,
start with the headset in power
OFF
mode. Hold
the
CENTER
button for 6 seconds. The
LED
will
flash alternating
RED
and
BLUE
to indicate that it
is ready to pa ir.
Note: When more than 8 hosts are paired, the oldest paired
device will be automatically dropped when a new device is
paired. You may completely clear the list of stored devices by
pressing
VOLUME UP
&
VOLUME DOWN
, while the power is on,
until the
LED
flashes
RED
&
BLUE
twice.
The Linea No10 is:
in pairing mode.
paired with your device.
×2
Linea Nº10
Linea Nº1
Linea Nº2
4. 要将 Linea N º 10 与另一个设备配
对，请从电源关闭的耳机开始。按住
“中央”按钮 6 秒钟。LED 将交替闪
烁红色和蓝色，表示耳机已准备好进
行配对。
注意：当配对 8 个以上的设备时，配对新设备时将自动
丢弃最早配对的设备。通过在电源打开时同时按“音量调
高”和“音量调低”按钮，直到 LED 闪烁红色和蓝色两
次，可以完全清除存储设备列表。
Linea N º 10：
处于配对模式
已与设备配对
为 Linea N
º
10 配对
Linea N º 10 一次可以记住最多 8 个以
前曾经连接过的设备。
1.
要首次打开耳机电源并进行配对，请
按住“中央”按钮 2 秒钟。LED 将交
替闪烁红色和蓝色，表示耳机处于配对
模式。
2.
打开智能手机、平板电脑、计算机或
其他移动设备上的蓝牙
®
设置。按照设
备的配对说明操作并选择名为“Linea
N
º 10 ”的设备。
3. LED 将闪烁蓝色两次，表示 Linea
N º 10 已与您的设备配对。
按住 6 秒钟与另
一个设备配对。
按住
2
秒钟进
入配对模式。