905K463452 (267r)
Server-Based System Setup Guide
6
1.2. Connect one end of an Ethernet cable to the institution network and the other
end to Port 1.
*
NOTE:
The default client access port is Port 1, which is dedicated to the
institution network.
If it is not required to have the client access via the
institution network, Port 2 (A/V network) can be used for client access instead.
1.3. During the setup process (see
2.0
Initial Network Setup
), connect your client
computer to Port 2 (A/V network).
**
IMPORTANT:
Only Port 2 (A/V network) can be used during the initial network
setup. DHCP service runs only on this port.
*
If unsure,please consult with your local IT.
**
Client computer is not supplied.
Port 1 and Port 2 on the Connect Server (back)
Port 1
Port 2 (A/V network)