CAE Healthcare Fidelis Lucina, User Manual

Page: 231 / 390

Using Lucina
203
The simulator’s eyes can be set to Blinking or Closed . The default setting is Auto . With this setting, the
eyes are either blinking or closed based on the patient’s physiology. When the simulator’s eyelids are
closed, the eyes can still be manually opened for clinical inspection.
Additionally, eyelids can be programmed in scenarios to open and close spontaneously or can be fixed
in the closed position.
Blinking frequency is controlled by the Eyes: Blink Speed menu and can be set to one of four speeds:
Normal (the default), Slow , Fast and Rapid .
Setting the Reactive pupils option to Yes causes the pupils to re-size from the baseline in response to
changes in light. Light Reactivity Speed can be set to Sluggish or Brisk .
Seizures
Lucina simulates seizure activity when the feature is activated in Müse. To activate seizures, from the
Neurological view, set the
Seizures option to On . To deactivate seizures, set the Seizures option to Off .
NOTE: If eyes have been set to Closed or if neuromuscular blockage is set to greater than 30%, the eyes
will remain closed when seizures are activated.
For more information on the ICP, NMB, and Temperature parameters, see the Müse Parameter
Descriptions section of this user guide.