Read first:
37
CADIZ
During initial setup, you may need to allow notification access.
Under the menu item
"Reminder"
you can set up a vibration alarm. At the desired time, the
watch will vibrate gently. Here you will also find the drink and exercise reminder.
Under Movement reminder you can set a reminder that will alert you with a gentle vibration that
you haven't moved enough. To do this, specify the period in which you would like to receive
reminders and the reminder intervals and how often this should happen.
Do Not Disturb Mode
will let you silence notifications on the watch for specified periods of time.
The wake-up gesture is also deactivated at night.
With
"Pulse measurement"
,
"SpO2 measurement"
and
"Measure blood pressure"
you can
switch the automatic and permanent measurement of these values on and off. When the function
is switched on, the respective value is measured at regular intervals.
Please note: These measurements are for personal use only. They are not medical values
and do not replace a professional medical measuring device or a doctor’s advice!
With
"Find device"
you can make the CADIZ vibrate if the device is within Bluetooth range.
The
"Take photos"
function opens the camera of the XCFIT* app and at the same time activates
the camera icon on your CADIZ. Now press the smart button briefly to take a photo with your
smartphone camera.
With
"Temperature unit"
,
"Units"
and
"Time format"
you can adjust whether the weather is
displayed in Celsius or Fahrenheit, distances and other units are displayed in metric or imperial
and the time is displayed in 12h or 24h format.
The
"Backlight Duration"
defines how long the screen should light up after being
activated by the button or the wake-up gesture.
Note that the watch gives you the option to enable the Always On Display. However, the battery
life is massively reduced, since the display is the largest energy consumer.
Under
"More"
you have the option to reset the clock or restart the CADIZ.
This is useful if you find that your CADIZ is responding more slowly than usual.
To unpair the CADIZ from your smartphone, tap “
Unpair”
. You'll find
"Unpair"
in the Devices
screen at the top next to the CADIZ image. Then check the Bluetooth settings on your
smartphone (especially iPhone / Xiaomi) to see whether the CADIZ has been removed from the
list of paired Bluetooth devices. If this is not the case, disconnect the two devices here as well.
Summary of Contents for 570432
Page 1: ......
Page 52: ...XCFIT alkalmaz s 52 CADIZ...
