Cadillac XTS 2019 Owner'S Manual Download

Page: 228 / 319

Cadillac XTS Owner Manual (GMNA-Localizing-MidEast-12163105) - 2019 -

crc - 5/30/18

VEHICLE CARE

227

Engine Air Cleaner/Filter

231

2. Power Steering Fluid Reservoir

(Under Engine Cover).
See

Power Steering Fluid (LFX with

FWD)

238

Power Steering

Fluid (LF3 and LFX with AWD)

238

3. Engine Oil Fill Cap. See

Engine Oil

228

4. Engine Oil Dipstick. See

6. Engine Cooling Fans (Out of

View). See

Cooling System

233

7. Charged Air Coolant Bottle and

Pressure Cap. See

Cooling System

233

8. Brake Fluid Reservoir. See

Brake

Fluid

241

9. Engine Coolant Surge Tank and

Pressure Cap. See

10.

(Battery Cover not

Shown).

11. Remote Positive (+) Terminal

(Battery Cover not Shown). See

Jump Starting

275

12.

Engine Compartment Fuse Block

249

13. Windshield Washer Fluid

Reservoir. See

Washer Fluid

239

14. Remote Negative (

−

) Terminal

(Out of View). See

Jump Starting

275

Engine Cover

3.6L V6 Engine

1. Engine Oil Fill Cap

2. Engine Cover Bolt
3. Engine Cover

To remove:

1. Remove the oil fill cap (1).

2. Remove the engine cover bolt (2).

3. Raise the engine cover (3) to

release it from the retainers.

4. Lift and remove the engine cover.

5. Reverse Steps 1

–

4 to reinstall the

engine cover.

3.6L V6 Engine Twin Turbo Engine

1. Engine Oil Fill Cap
2. Engine Cover
3. Engine Cover Bolt

Summary of Contents for XTS 2019
































































































































































































































































































































Search results

Summary of Contents for XTS 2019

Reviews:

Related manuals for XTS 2019

Brands by name

Popular brands

Cadillac XTS 2019, Owner'S Manual

Search results

Summary of Contents for XTS 2019

Reviews:

Related manuals for XTS 2019

Brands by name

Popular brands