Cadillac SRX 2010, User Manual

Page: 162 / 468

Black plate (2,1)
Cadillac SRX Owner Manual - 2010
5-2 Lighting
;
(Parking Lamps): Turns the
parking lamps on together with the
following:
. Taillamps
. License Plate Lamps
. Instrument Panel Lights
2
(Headlamps): Turns the
headlamps on together with the
following lamps listed below.
A warning chime sounds if the
driver's door is opened when the
ignition switch is off and the
headlamps are on.
. Parking Lamps
. Taillamps
. License Plate Lamps
. Instrument Panel Lights
#
(Front Fog Lamps): For
vehicles with fog lamps, press
to turn the lamps on or off.
See Front Fog Lamps on
page 5 ‑ 6 .
Headlamp High/
Low-Beam Changer
2 3
Headlamp High/Low Beam
Changer: Push the turn signal/lane
change lever away from you to turn
the high beams on.
Pull the lever toward you to return to
low beams.
This indicator light turns on in the
instrument panel cluster when the
high beam headlamps are on.
Flash-to-Pass
The flash ‐ to ‐ pass feature works with
the low beams or Daytime Running
Lamps (DRL) on or off.
To flash the high beams, pull the
turn signal/lane change lever all the
way toward you, then release it.
Daytime Running
Lamps (DRL)
Daytime Running Lamps (DRL) can
make it easier for others to see the
front of your vehicle during the day.
Fully functional daytime running
lamps are required on all vehicles
first sold in Canada.
A light sensor on top of the
instrument panel makes the DRL
work, so be sure it is not covered.
The DRL system makes the
low
‐ beam headlamps come on at a
reduced brightness or for vehicles
with High Intensity Discharge (HID)
headlamps, the DRL lights will come
on when the following conditions
are met:
. The ignition is in the ON/
RUN mode.
. The exterior lamps control is
in AUTO.
. The engine is running.