Single-Disc CD Player Controls
To play a CD, insert the disc, label
up, partway into the CD slot. The
player will pull it in. Use the
following controls to operate the
player.
SEEK
:
Press this button’s up or
down arrow to seek the next or
previous track on the CD.
SCAN
:
Press this button to listen
to each track for 10 seconds. Press
the button again to stop scanning
tracks.
EJECT:
Press and release this
button to stop a CD when it is
playing or to eject a CD that is
currently playing.
Six-Disc CD Changer Controls
(without Navigation System)
Loading One Disc:
With the ignition on or off, do the
following:
• Press and release the LOAD
button. “Please Wait” will appear
on the display.
• Load the disc when the display
reads “INSER T.” Insert a disc
partway into the slot, label side up.
The player will pull the disc in.
Loading Multiple Discs:
With the ignition on or off, do the
following:
• Press and hold the LOAD button
for two seconds. A beep will be
heard and “Please Wait” will
appear on the display.
• When the display reads “INSER T,”
load a disc partway into the slot,
label side up. The player will
pull it in.
If the radio is on, the last disc loaded
will begin to play automatically. Use
the SEEK, SCAN and EJECT buttons as
described previously to operate the
player.
Note:
CDs with any labels may jam in
the CD player. Label a CD using a
permanent marker. If more than one
CD is inserted into the slot at one
time, or if scratched or damaged CDs
are played, the CD player could be
damaged. When using the CD player,
use only CDs in good condition
without added labels; load one CD at
a time; and keep the CD player and
the loading slot free of foreign
materials, liquids and debris.
Digital Signal Processing
(DSP) (if equipped with Bose
®
Audio System)
The Digital Signal Processing (DSP)
system provides a choice of five
different listening experiences:
• DSP Normal: This setting provides
the best overall audio performance
for all passengers.
S
R
X
