Cadillac Prodigy One.2, Installation Manual

Page: 5 / 19

Remove center console trim bezels. use hook tool to release panel from
rear. Place panels in safe location to assure they don’t get scratched.
Remove gear selector trim bezel. Use hook tool to release panel from
rear. Place panel in a safe location
.
Place shifter into “Neutral” (fig A), pull gear selector trim bezel away from
radio dash bezel (fig B),
Remove two 7mm screws at the lower left and right of the radio dash
bezel (fig c).
Remove shown plastic trim. Use hook too to pull from noted area.
Remove shown plastic trim. Use hook tool to pull from noted area.
Use caution not to break plastic tabs.
Remove radio dash bezel. Use caution and unplug all connections from
back of panel.