Cadillac Escalade EXT 2013 Owner'S Manual Download | Manualshive

Page: 376 / 476

background image

Black plate (48,1)

Cadillac Escalade EXT Owner Manual - 2013 - CRC - 4/5/12

10-48

Vehicle Care

Tire Pressure for
High-Speed Operation

{

WARNING

Driving at high speeds, 160 km/h
(100 mph) or higher, puts an
additional strain on tires.
Sustained high-speed driving
causes excessive heat buildup
and can cause sudden tire failure.
You could have a crash and you
or others could be killed. Some
high-speed rated tires require
inflation pressure adjustment for
high-speed operation. When
speed limits and road conditions
are such that a vehicle can be
driven at high speeds, make sure
the tires are rated for high-speed
operation, in excellent condition,
and set to the correct cold tire
inflation pressure for the
vehicle load.

Vehicles with P265/65R18 or P285/
45R22 size tires require inflation
pressure adjustment when driving
the vehicle at speeds of 160 km/h
(100 mph) or higher. Set the cold
inflation pressure to 20 kPa (3 psi)
above the recommended tire
pressure shown on the Tire and
Loading Information Label. Return
the tires to the recommended cold
tire inflation pressure when
high-speed driving has ended. See

Vehicle Load Limits on page 9

and

Tire Pressure on page 10

Tire Pressure Monitor
System

The Tire Pressure Monitor System
(TPMS) uses radio and sensor
technology to check tire pressure
levels. The TPMS sensors monitor
the air pressure in your tires and
transmit tire pressure readings to a
receiver located in the vehicle.

Each tire, including the spare (if
provided), should be checked
monthly when cold and inflated to

the inflation pressure recommended
by the vehicle manufacturer on the
vehicle placard or tire inflation
pressure label. (If your vehicle has
tires of a different size than the size
indicated on the vehicle placard or
tire inflation pressure label, you
should determine the proper tire
inflation pressure for those tires.)

As an added safety feature, your
vehicle has been equipped with a
tire pressure monitoring system
(TPMS) that illuminates a low tire
pressure telltale when one or more
of your tires is significantly
under-inflated.

Accordingly, when the low tire
pressure telltale illuminates, you
should stop and check your tires as
soon as possible, and inflate them
to the proper pressure. Driving on a
significantly under-inflated tire
causes the tire to overheat and can
lead to tire failure. Under-inflation
also reduces fuel efficiency and tire
tread life, and may affect the
vehicle's handling and stopping
ability.

«
...
374
375
376
377
378
...
»

Summary of Contents for Escalade EXT 2013





























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade EXT 2013

Brand: Camcar Pages: 6

Brand: Harmar Mobility Pages: 10

Brand: Kargo Master Pages: 5

PICASSO XSARA DESIRE 1.6 - MESUREMENT

Brand: CITROEN Pages: 2

Brand: Porsche Pages: 195

Brand: Edelbrock Pages: 2

Brand: Honda Pages: 32

Brand: STC Pages: 6

Brand: Bestop Pages: 31

Speed & Route Profiler

Brand: Racelogic Pages: 24

Brand: Renault Pages: 198

Giulietta 2.0 JTDM

Brand: Alfa Romeo Pages: 14

Brand: Acura Pages: 4

Brand: Kuda Pages: 3

Brand: Curt Group Pages: 2

Brand: Scion Pages: 58

2001 Accord Sedan

Brand: Honda Pages: 372

Brand: Imiola HAK-POL Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands