13
Refer to Owner Manual for further information.
Driver
Information
Safety &
Security
Comfort
Performance &
Maintenance
Owner
Privileges
TM
Entertainment
Convenience
❏
Reviewed with Customer (Please Check Box)
start, perform one of the
following functions:
• Press and hold the
button
until the parking lamps turn off.
• Press and release the Hazard
Warning Flashers button inside
the vehicle. Press the button
again to turn off the flashers.
• Turn the key in the ignition
switch on and then off.
• The engine will automatically
stop when time expires.
AUTO TURN SIGNAL
The turn signal lever includes
an automatic lane change
signal feature.
To signal a lane change, raise or
lower the lever until the arrow on
the instrument panel cluster starts
to flash, and then release the lever.
The turn signal will automatically
flash three times. If the Tow/Haul
mode is selected, the turn signal
will automatically flash six times.
To signal a turn, move the lever all
the way up or down.
INTELLIBEAM™ AUTOMATIC
HEADLAMPS (if equipped)
IntelliBeam uses a digital light
sensor behind the inside rearview
mirror to maximize forward night
vision. The system automatically
switches on the high-beam
headlamps when no other vehicle
traffic is present, and switches to
low beam intensity when the
headlamps or taillamps of other
vehicles are detected. The system
operates only when driving over
20 mph (32 km/h).
The system is turned on
automatically when the headlamp
system is set to AUTO and the turn
signal/multifunction lever is in the
low beam position.
To turn off the system, press the
(On/Off) button on the inside
rearview mirror. Press the button
again to turn the system back on.
AUTOMATIC HEADLAMP SYSTEM
Your vehicle is equipped with an
Automatic Headlamp System,
which automatically turns on the
Daytime Running Lamps (DRL)
during the day and the headlamps
and other exterior lamps at night
or when necessary.
The system uses a light sensor,
located on top of the instrument
panel, to determine light conditions.
For proper system operation, avoid
placing any objects on or near
the sensor.
Exterior Lamp Controls
The exterior lamps also can be
operated manually using the control
knob located on the left side of the
instrument panel. The knob can be
rotated to the following positions:
112693_09a_Escalade_ESV_052108.qxd:Escalade_ESV 2007 A 5/21/08 1:07 PM Page 15
