Cadillac Escalade Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
15567102) - 2022 - CRC - 8/16/21
INFOTAINMENT SYSTEM
199
7. If the vehicle name does not
appear on your cell phone, there
are a few ways to start the pairing
process over:
.
Turn the cell phone off and then
back on.
.
Go back to the beginning of the
Phone menus on the
infotainment display and restart
the pairing process.
.
Reset the cell phone, but this
step should be done as a last
effort.
8. If the cell phone prompts to accept
connection or allow phone book
download, touch Always Accept
and Allow. The phone book may
not be available if not accepted.
9. Repeat Steps 1
−
8 to pair additional
cell phones.
First to Connect Paired Phones
If multiple paired cell phones are
within range of the system, the
system connects to the paired cell
phone that is set as First to Connect.
To enable a paired cell phone as the
First to Connect phone:
1. Make sure the cell phone is
turned on.
2. Touch Settings, then touch System.
3. Touch Phones to access all paired
and all connected cell phones and
mobile devices.
4. Touch the phone name of the cell
phone to open the cell phone
’
s
settings menu.
5. Touch the First to Connect option,
to enable the setting for that
device.
Cell phones and mobile devices can be
added, removed, connected, and
disconnected. A sub-menu will display
whenever a request is made to add or
manage cell phones and mobile
devices.
Secondary Phone
A cell phone can be enabled as a
Secondary Phone by touching the
information icon to the right of the
paired cell phone name to open the
phone settings menu. If a cell phone
is enabled as a Secondary Phone, it
can connect simultaneously alongside
another Bluetooth mobile device. In
doing so, the Secondary Phone will be
labeled as Incoming Calls. This means
the mobile device can only receive
calls. The Address Book of a
Secondary Phone will not be available
and hands-free outgoing calls cannot
be placed using this cell phone.
If needed, touch the Secondary Phone
while in the Phones list to swap it into
the Outgoing and Incoming role. This
role makes it possible to place
outgoing calls from the Contacts and
Recents list.
Listing All Paired and Connected
Phones
1. Touch the Phone icon on the
Home Page.
2. Touch Phones.
Disconnecting a Connected Phone
1. Touch the Phone icon on the
Home Page.
2. Touch Phones.
3. Touch the information icon next to
the connected cell phone or mobile
device to show the cell phone
’
s or
mobile device
’
s information display.
4. Touch Disconnect.
