Black plate (13,1)
Cadillac CTS/CTS-V Owner Manual - 2011
Keys, Doors and Windows
2-13
Extending Engine Run Time
To extend the engine run time by
10 minutes, repeat Steps 1 and 2
while the engine is still running.
The engine run time can only be
extended if it is the first remote start
since the vehicle has been driven.
Remote start can be extended
one time.
If the remote start procedure
is used again before the
first 10 minute time frame has
ended, the first 10 minutes will
immediately expire and the
second 10 minute time frame will
start.
For example, if the lock button and
then the remote start buttons are
pressed again after the vehicle
has been running for five minutes,
10 minutes are added, allowing
the engine to run for a total of
15 minutes.
A maximum of two remote starts or
remote start attempts are allowed
between ignition cycles.
After the vehicle's engine has been
started two times using the remote
start button, the ignition must be
turned on and then back off before
the remote start procedure can be
used again.
Shutting the Engine Off After a
Remote Start
To manually shut off the engine
after a remote start, do any of the
following:
.
Press
/
until the parking lamps
turn off.
.
Turn on the hazard warning
flashers.
.
Turn the ignition switch on and
then off.
Conditions in Which Remote Start
Will Not Work
The remote vehicle start feature will
not operate if any of the following
occur:
.
The ignition is in any position
other than LOCK/OFF.
.
A keyless access transmitter is
inside the vehicle.
.
The vehicle's hood is not closed.
.
The hazard warning flashers
are on.
.
There is an emission control
system malfunction.
.
The engine coolant temperature
is too high.
.
The oil pressure is low.
.
Two remote vehicle starts
have already been used. The
maximum number of remote
starts or remote start attempts
between ignition cycles with the
key is two.
