
Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-Europe-11374014) -
2018 - crc - 9/14/17
VEHICLE CARE
287
light comes on, stop as soon as
possible and inflate the tyres to the
recommended pressure shown on the
Tyre and Loading Information label.
See
.
A message to check the pressure in a
specific tyre displays in the Driver
Information Centre (DIC). The low tyre
pressure warning light and the DIC
warning message come on at each
ignition cycle until the tyres are
inflated to the correct inflation
pressure. Using the DIC, tyre pressure
levels can be viewed. For additional
information and details about the DIC
operation and displays see
.
The low tyre pressure warning light
may come on in cool weather when
the vehicle is first started, and then
turn off as the vehicle is driven. This
could be an early indicator that the air
pressure is getting low and needs to
be inflated to the proper pressure.
A Tyre and Loading Information label,
attached to your vehicle, shows the
size of the original equipment tyres
and the correct inflation pressure for
the tyres when they are cold. See
for an
example of the Tyre and Loading
Information label and its location.
Also see
.
The TPMS can warn about a low tyre
pressure condition but it does not
replace normal tyre maintenance. See
,
, and
Caution
Tyre sealant materials are not all
the same. A non-approved tyre
sealant could damage the TPMS
sensors. TPMS sensor damage
caused by using an incorrect tyre
sealant is not covered by the
vehicle warranty. Always use only
the GM approved tyre sealant
available through your dealer or
included in the vehicle.
Factory-installed Tyre Inflator Kits use
a GM approved liquid tyre sealant.
Using non-approved tyre sealants
could damage the TPMS sensors. See
Tyre Sealant and Compressor Kit
for information regarding the inflator
kit materials and instructions.
Tyre Loading Selection
—
If
Equipped
Adjust the vehicle tyre pressures to
match the load condition according to
the Tyre and Loading Information
label. See
.
Select the appropriate Tyre Loading
setting. See
If tyre pressures and Tyre Loading do
not match, the tyre pressure light may
indicate a low tyre. See
TPMS Malfunction Light and
Message
The TPMS will not function properly if
one or more of the TPMS sensors are
missing or inoperable. When the
system detects a malfunction, the low
tyre pressure warning light flashes for
about one minute and then stays on
for the remainder of the ignition cycle.
A DIC warning message also displays.
The malfunction light and DIC
warning message come on at each