Cadillac CT4 Owner Manual (GMNA-Localizing-MidEast-15283644) - 2022 -
CRC - 7/28/21
210
DRIVING AND OPERATING
3. Scroll down to Launch RPM.
4. Adjust the desired RPM: 1200
–
2400 RPM.
.
Firmly press and hold the brake
pedal to activate Launch
Control.
5. Quickly apply full throttle. Release
the brake pedal to launch the
vehicle.
Line Lock (If Equipped)
{
Warning
The vehicle may move unexpectedly
when using Line Lock, which could
cause injury to persons or property
located nearby. Only use Line Lock
on a closed track where there is a
large clear area around all sides of
the vehicle. Be ready to apply the
brakes immediately if the vehicle
begins to move. Do not use Line
Lock in an area that is accessible to
(Continued)
Warning (Continued)
the public or where people or
property are located near the
vehicle.
Caution
Attempting to shift when the drive
wheels are spinning and do not
have traction may cause damage to
the transmission. Damage caused
by misuse of the vehicle is not
covered by the vehicle warranty. Do
not attempt to shift when the drive
wheels do not have traction.
Line Lock allows for locking the front
brakes independently of the rear
brakes. This allows the rear tires to
spin when the throttle is applied.
To enter Line Lock, all of these
conditions must be met:
.
The vehicle must be in Track Mode.
.
Performance Traction Management
(PTM) Mode must be enabled.
.
The steering wheel must be straight.
.
The driver door must be closed.
