Cadillac ATS 2014 Owner'S Manual Download Page 440

Page: 440 / 466

Black plate (2,1)

Cadillac ATS Owner Manual (GMNA-Localizing-MidEast-6335741) - 2014 -

CRC - 5/20/13

12-2

Technical Data

Engine Identification

The eighth character in the VIN
is the engine code. This code
identifies the vehicle's engine,
specifications, and replacement
parts. See

“

Engine Specifications

”

under

Capacities and Specifications

on page 12-3

for the vehicle's

engine code.

Service Parts
Identification Label

This label, on the load floor under
the spare tire cover in the trunk, has
the following information:

Vehicle Identification
Number (VIN).

Model designation.

Paint information.

Production options and special
equipment.

Do not remove this label from the
vehicle.

Summary of Contents for ATS 2014



















































































































































































































































































































































































































































































Search results

Summary of Contents for ATS 2014

Reviews:

Related manuals for ATS 2014

Brands by name

Popular brands

Cadillac ATS 2014, Owner'S Manual

Search results

Summary of Contents for ATS 2014

Reviews:

Related manuals for ATS 2014

Brands by name

Popular brands