Fig. 7
8.
Locate 12V accessory at vehicles cigar lighter, fuse box, ignition cluster
etc.)
Warning:
Extension (
Fig. 7
) must be connected to a
switched/accessory supply source, not constant battery supply.
Pairing
Pairing process varies among devices but basic steps are the same. This process
is done upon initial install and will not have to be repeated.
1.
Turn Ignition and radio “ON”
LED inside module peephole flashes (pairing mode)
2.
On A2DP device: Go to
Settings, Wireless & Networks, Bluetooth Settings
3.
Select
Bluetooth
and turn on.
4.
Select Bluetooth settings
5.
Tick
Scan for devices
.
6.
Based on option selected at checkout, one of two Bluetooth device names will
appear
.
(See below). Select it from list and proceed to next step.
LED inside module peephole glows steady (paired)
Retaining XM
not retaining XM