Black plate (28,1)
Cadillac SRX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
6081464) - 2014 - CRC - 10/4/13
10-28
Vehicle Care
2. Unlatch three clips and lift up the
underhood electrical center
cover to remove.
Passenger Side
The removal of the air filter/cleaner
assembly and base is required for
the replacement of one of these
bulbs:
1. Open the hood. See
Hood on
page 10-4
.
2. Remove the air cleaner/filter
cover. See
Engine Air Cleaner/
Filter on page 10-10
.
3. Lift the air cleaner/filter base to
disengage from the three pins.
Low-Beam Headlamps/Daytime
Running Lamps (DRL),
High-Beam Headlamps (Base)
1. From the back side of the
headlamp assembly, remove the
top cap to replace the low-beam
headlamp/DRL bulb.
2. From the back side of the
headlamp assembly, remove the
bottom cap to replace the
high-beam headlamp bulb.
3. Disconnect the electrical
connector.
4. Remove the bulb socket from
the headlamp assembly.
5. Replace the bulb in the bulb
socket.
6. Install the bulb socket in the
headlamp assembly.
7. Connect the electrical connector.