Cadillac 2009 ESCALADE EXT Owner'S Manual Download Page 305

Page: 305 / 546

•

Current position calibration is set incorrectly.

•

Vehicle is traveling at high speed.

•

Vehicle changes directions more than once, or
when the vehicle is turning on a turn table in a
parking lot.

•

Vehicle is entering and/or exiting a parking lot
or a garage.

•

GPS signal is not received.

•

Roof carrier is installed on the vehicle.

•

Vehicle is being driven with tire chains.

•

Tires are replaced.

•

Tire pressure for the tires is incorrect.

•

Tires are worn.

•

First time the map DVD is inserted.

•

Battery is disconnected for several days.

•

Vehicle is driving in heavy traffic where driving is at
low speeds, and the vehicle is stopped and started
repeatedly.

See your dealer/retailer if other problems occur.

Problems with Route Guidance

Inappropriate route guidance may occur under one or
more of the following conditions:

•

You have not turned onto the road indicated.

•

Route guidance may not be available when using
automatic rerouting for the next right or left turn.

•

The route may not be changed when using
automatic rerouting.

•

There is no route guidance when turning at an
intersection.

•

Plural names of places may be announced
occasionally.

•

It may take a long time to operate automatic
rerouting during high-speed driving.

•

Automatic rerouting may display a route returning to
the set stopover if you are heading for a destination
without passing through a set stopover.

•

The route prohibits the entry of a vehicle due to a
regulation by time or season or any other regulation
which may be given.

4-55

Summary of Contents for 2009 ESCALADE EXT



































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 ESCALADE EXT

Reviews:

Brands by name

Popular brands

Cadillac 2009 ESCALADE EXT, Owner'S Manual

Search results

Summary of Contents for 2009 ESCALADE EXT

Reviews:

Brands by name

Popular brands