Cadillac 2007 Escalade EXT, Owner'S Manual

Page: 207 / 580

•
The headlamp stalk is moved forward to
the high-beam position. See
Headlamp
High/Low-Beam Changer on page 197 .
When either of these conditions occur, the
IntellliBeam™ feature will be disabled and
the IntellliBeam™ light in the mirror will turn
off until the high-beam stalk is returned to
the neutral position.
•
If IntellliBeam™ was using low-beams prior to
this action, the IntellliBeam™ feature will be
temporarily disabled until the stalk is returned
to the neutral position.
•
The exterior lamp control is turned to any
setting except AUTO.
When this occurs, IntellliBeam™ will be
disabled until the control is turned back to
the AUTO position.
•
The IntellliBeam™ system is turned off at
the inside rearview mirror.
IntellliBeam™ may not turn off the high-beams if
the system cannot detect other vehicle’s lamps
because of any of the following:
•
The others vehicle’s lamp(s) are missing,
damaged, obstructed from view or otherwise
undetected.
•
The other vehicle’s lamp(s) are covered with
dirt, snow and/or road spray.
•
The other vehicle’s lamp(s) cannot be detected
due to dense exhaust, smoke, fog, snow, road
spray, mist or other airborne obstructions.
•
Your vehicle’s windshield is dirty, cracked or
obstructed by something that blocks the
view of the IntellliBeam light sensor.
•
Your vehicle’s windshield is covered with ice,
dirt, haze or other obstructions.
•
Your vehicle is loaded such that the front end
of the vehicle points upward, causing the
IntellliBeam sensor to aim high and not detect
headlamps and taillamps.
•
You are driving on winding or hilly roads.
You may need to manually disable or cancel the
high-beam headlamps by turning the low-beam
headlamps on, if any of the above conditions exist.
207