Cadillac 2006 CTS, Owner'S Manual

Page: 311 / 442

Windshield Washer Fluid
What to Use
When you need windshield washer fluid, be sure to
read the manufacturer’s instructions before use. If you
will be operating your vehicle in an area where the
temperature may fall below freezing, use a fluid that
has sufficient protection against freezing.
Adding Washer Fluid
The CHECK WASHER FLUID message will appear
on the Driver Information Center (DIC) when the fluid
level is low. See
DIC Warnings and Messages on
page 3-61 for more information.
Open the cap with the
washer symbol on it.
Add washer fluid until the
tank is full. See
Engine
Compartment Overview
on page 5-12
for reservoir
location.
Notice:
•
When using concentrated washer fluid, follow the
manufacturer’s instructions for adding water.
•
Do not mix water with ready-to-use washer fluid.
Water can cause the solution to freeze and
damage your washer fluid tank and other parts of
the washer system. Also, water does not clean as
well as washer fluid.
•
Fill your washer fluid tank only three-quarters full
when it is very cold. This allows for expansion if
freezing occurs, which could damage the tank if
it is completely full.
•
Do not use engine coolant (antifreeze) in your
windshield washer. It can damage your washer
system and paint.
5-37