2-21
Canadian Owners: If you lose or damage your keys,
only a GM dealer can service PASS
-
Key III to have new
keys made. To program additional keys you will require
two current driver’s keys (black in color). You must add
a step to the following procedure. After Step 2 repeat
Steps 1 and 2 with the second current driver’s key.
Then continue with Step 3.
To program the new key:
D Insert the current driver’s key (black in color) in the
ignition and start the engine. If the engine will not
start see your dealer for service.
D After the engine has started, turn the key to OFF, and
remove the key.
D Insert the key to be programmed and turn it to ON
within ten seconds of removing the previous key.
D The SECURITY light will turn off once the key has
been programmed. It may not be apparent that the
SECURITY light went on due to how quickly the
key is programmed.
D Repeat the Steps 1 through 4 if additional keys are
to be programmed.
If you are ever driving and the SECURITY light comes
on and stays on, you will be able to restart your engine
if you turn it off. Your PASS
-
Key III system, however,
is not working properly and must be serviced by your
dealer. Your vehicle is not protected by the
PASS
-
Key III system at this time.
If you lose or damage a PASS
-
Key III key, see your
dealer to have a new key made.
