Cadi T560, User Manual, Page: 8 / 14

To go to the
Clock/Room Temperature mode
, press the SET
Button.
NOTE:
In this mode, the time and room temperature will be
displayed alternately whenever the thermometer is left idle for
more than 30 seconds after a measurement.
To go to the
OFF mode
, do not press any button but leave the
thermometer idle. The thermometer will turn off automatically
after 30 seconds.
NOTE:
In this mode, the time and room temperature will be not
displayed and the thermometer will turn off automatically
whenever it is left idle for more than 30 seconds after a
measurement.
If you wish to change from the
OFF mode
to the
Clock/Room
Temperature mode
, press the Set Button repeatedly until you
reach Step 9. At Step 9, select the desired mode.
If you wish to change from the
Clock/Room Temperature
mode
to the
OFF mode
, press the Set Button once and then
leave the thermometer idle. The thermometer will turn off
automatically after 30 seconds.
The measurement unit mode will be activated.
will blink.
will blink.
will be activated.
will be activated.
(which indicates that the thermometer is ready).
a beep
Use the
following
10
TIME, MEASUREMENT UNIT AND IDLE MODE