Cadi.Sense Wireless Thermometer, User Manual, Page: 31 / 36

Cadi. Sense User Manual
T-S1-800.900-I10-B01 31
WPS (WiFi Protected Setup)
WPS is an alternative and easier way to connect SmartNode to your WiFi router or a wireless
client.
To connect SmartNode to your WiFi router/AP via WPS:
• Press the WPS button on the SmartNode for 5 seconds to activate WPS Enrollee mode.
• Press the WPS button on your WiFi router/AP within 2 minutes. The 2 devices should
then associate automatically within 2 minutes.
To connect a wireless client to SmartNode via WPS:
•
Press the WPS button on the SmartNode for 2 seconds to activate WPS Registrar mode.
• Press the WPS button on your wireless client within 2 minutes. The 2 devices should
then associate automatically within 2 minutes.
Configuring Wireless MAC Filtering
Wireless MAC Filtering allows you to select which wireless clients to allow or deny access to
the Wireless-N Range Extender. To configure Wireless MAC Filtering:
•
Open your PC/laptop’s web browser and enter: “http://10.10.10.10/main.asp”