The Com-Pak Plus Manual Reset
replacement instructions
SAVE THESE INSTRUCTIONS
IMPORTANT INSTRUCTIONS
WARNING
Turn the electrical power off at the electrical panel board (circuit breaker or fuse box) and lock or
tag the panel board door to prevent someone from turning on power while you are working on the
heater. Failure to do so could result in serious electrical shock, burns, or possible death.
1
.
It is important that you verify power has been turned off
and no power is going to the heater before proceeding.
Circuit breakers are often not marked correctly and
turning the wrong breaker off could mean electricity is
flowing to the heater, even if the heater does not appear
to be working.
2. Once you verify the power has been turned off correctly,
proceed to the next step.
3. Please see your product Owner’s Guide for additional
installation, operation and maintenance instructions for
both reset and heater. Owner’s Guides may be
downloaded at
www.cadetco.com
.
www.cadetco.com Tel: 360-693-2505 P.O. Box 1675 Vancouver, WA 98668-1675
Note:
Now is the perfect opportunity to clean your heater. See
original product Owner’s Guide or go to
www.cadetco.com
and find detailed cleaning instructions under
Other Links
for
the Com-Pak Plus.
The Com-Pak Twin Plus
CT402, CT302, CT408,
The Com-Pak Plus
C202, C152, C122, C102, C072,
C151, C101, C051, C208
MODELS
TOOLS REQUIRED:
•
Small Flathead Screwdriver
•
Phillips Screwdriver
•
Wire Cutter
•
Cable or Wire Ties
•
Wire Connectors
•
Wire Stripper
•
Crimping Tool
•
Needle Nose Pliers
IF YOU ARE UNCOMFORTABLE WORKING WITH ELECTRICAL APPLIANCES, UNABLE TO FOLLOW THESE GUIDELINES,
OR DO NOT HAVE THE NECESSARY EQUIPMENT, CONSULT A LICENSED ELECTRICIAN.
1