background image

MANUFACTURER’S LIMITED WARRANTY FOR:

The limited warranty set forth below is given by Cub Cadet 
LLC with respect to new merchandise purchased and used in 
the United States, its possessions and territories.

Cub Cadet LLC warrants this product against defects for a 
period of two (2) years commencing on the date of original 
purchase and will, at its option, repair or replace, free of 
charge, any part found to be defective in materials or 
workmanship.  This limited warranty shall only apply if this 
product has been operated and maintained in accordance 
with the Operator’s Manual furnished with the product, and 
has not been subject to misuse, abuse, commercial use, 
neglect, accident, improper maintenance, alteration, 
vandalism, theft, fire, water, or damage because of other peril 
or natural disaster.  Damage resulting from the installation or 
use of any accessory or attachment not approved by Cub 
Cadet LLC for use with the product(s) covered by this manual 
will void your warranty as to any resulting damage.

Normal wear parts or components thereof are subject to 
separate terms as follows:

  

All normal wear parts or 

component failures will be covered on the product for a period 
of 90 days regardless of cause.  After 90 days, but within the 
two year period, normal wear part failures will be covered 
ONLY IF caused by defects in materials or workmanship of 
OTHER component parts.  Normal wear parts and 
components include, but  are not limited to:  batteries, belts, 
blades, blade adapters, grass bags, rider deck wheels, seats, 
snow thrower skid shoes, shave plates, auger spiral rubber, 
and tires.

HOW TO OBTAIN SERVICE:

 Warranty service is available, 

WITH PROOF OF PURCHASE, through your local authorized 
service dealer.  To locate the dealer in your area, check your 
Yellow Pages, or contact Cub Cadet LLC at P.O. Box 361131, 
Cleveland, Ohio 44136-0019, or call 1-877-282-8684,  or log 
on to our Web site at www.cubcadet.com.

This limited warranty does not provide coverage in the 
following cases:

a.

The engine or component parts thereof. These items 

carry a separate manufacturer’s warranty.  Refer to 
applicable manufacturer’s warranty for terms  and 
conditions.

b.

Log splitter pumps, valves, and cylinders have a sepa

rate one year warranty.

c.

Routine maintenance items such as lubricants, filters, 

blade sharpening, tune-ups, brake adjustments, clutch 
adjustments, deck adjustments, and normal 
deterioration of the exterior finish due to use or 
exposure.

d.

Cub Cadet LLC does not extend any warranty for 

products sold or exported outside of the United States, 
its possesions  and territories, except those sold 
through Cub Cadet LLC’s authorized channels of 
export distribution.

e.

Parts that are not genuine Cub Cadet parts are not 

covered by this warranty.

f.

Service completed by someone other than an 

authorized service dealer is not covered by this 
warranty.

g.

Transportation charges and service calls are not 

covered.

No implied warranty, including any implied warranty of 
merchantability of fitness for a particular purpose, 
applies after the applicable period of express written 
warranty above as to the parts as identified. No other 
express warranty, whether written or oral, except as 
mentioned above, given by any person or entity, 
including a dealer or retailer, with respect to any product, 
shall bind Cub Cadet LLC.  During the period of the 
warranty, the exclusive remedy is repair or replacement 
of the product as set forth above.

The provisions as set forth in this warranty provide the 
sole and exclusive remedy arising from the sale.  Cub 
Cadet LLC shall not be liable for incidental or 
consequential loss or damage including, without 
limitation, expenses incurred for substitute or 
replacement lawn care services or for rental expenses to 
temporarily replace a warranted product.

Some states do not allow the exclusion or limitation of 
incidental or consequential damages, or limitations on how 
long an implied warranty lasts, so the above exclusions or 
limitations may not apply to you.

In no event shall recovery of any kind be greater than the 
amount of the purchase price of the product sold.  

Alteration 

of safety features of the product shall void this warranty.  

You assume the risk and liability for loss, damage, or injury to 
you and your property and/or to others and their property 
arising out of the misuse or inability to use the product.

This limited warranty shall not extend to anyone other than the 
original purchaser or to the person for whom it was purchased 
as a gift.

HOW STATE LAW RELATES TO THIS WARRANTY:

  This 

limited warranty gives you specific legal rights, and you may 
also have other rights which vary from state to state.

Cub Cadet LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019; Phone: 1-877-282-8684

Summary of Contents for 1027









































Reviews: