Cadence Q DRIVE SERIES Owner'S Manual Download Page 2

Thank you for purchasing a Cadence Q Series amplifier. Over the past years, the technology used to create audio amplifiers has grown 
by leaps and bounds. We have tens of thousands of satisfied customers still using our first generation Ultra Drive amplifiers which are 
more than 10 years old. Our competition is satisfied with just continuing to build the same units year after year without thought for 
improvement, but not Cadence.   We consider it our mission to use our expertise in developing the latest technologies and to bring you 
the absolute best sounding, most powerful amplifiers on the market and of course at a reasonable price. We are very proud to introduce 
this third generation of Q Series amplifiers featuring C-FORCE technology, "ARVA" and "ADR" circuitry. You will be amazed at the 
quality and power that these new amps offer. You will "Boom-Harder!" with   Q Series amplifiers. 

We have spared no expense in designing these amplifiers, creating the most rugged, reliable, powerful and best performing amplifiers. 

 

In fact we are so sure of the quality we backup every Q Series amplifier with our exclusive two-year warranty which exemplifies our 
commitment to excellence in car audio musical reproduction. (See enclosed warranty card for details.) 

Please read this installation guide carefully for proper use of your Cadence power amplifier. Should you need technical assistance 
during or after your installation please call our technical-line between 9:30 am and 5:00 PM EST at 732/370-5400. Read this entire 
guide fully before attempting your installation. 

When installing the amplifier, secure it tightly. An unmounted amplifier in your car can cause serious injury to passengers and damage 
to your vehicle if it is set in motion by an abrupt driving maneuver or short stop. 

WARNING: BE AWARE! 

Use of this amplifier at extreme high volumes for extended periods of time may cause hearing loss and or 

hearing damage. During periods of prolonged high volume levels it is recommended that you use ear safety devices. Playing Cadence 
amplifiers at high volume levels while driving will impair your ability to hear necessary traffic sounds. While driving always keep your 
sound volume at reasonable levels. We at Cadence want you listening for many years to come.

 

!

Summary of Contents for Q DRIVE SERIES













Reviews: