MINERVA
10 inch FIR point source loudspeaker
Safety precautions
YOU ART. WE SOUND.
Potential risk of personal injury
Never stand in the direct sound beam close to a loudspeakers driven at a high level.
Professional loudspeaker systems can cause sound pressure levels that could harm
human health. Noncritical sound levels at about 90 dB can cause hearing damage if
people are exposed to it over a longer period.
In order to prevent accidents when deploying loudspeakers on the ground or when
flown, please take note of the following:
• When setting up the loudspeakers or loudspeaker stands, make sure they are
standing on a firm surface. If you place several systems on top of one another, use
straps to secure them against movement.
• Only use accessories which have been tested and approved by Cadenbach Acous-
tics for assembly and mobile applications. Pay attention to the correct application
and maximum load capacity of the accessories.
• Ensure that all additional hardware, fixings and fasteners used for installation or
mobile use are of an appropriate size and load safety factor. Pay attention to the
manufacturers instructions and to the relevant safety guidelines.
• Regularly check the loudspeaker housings and accessories for visible signs of
wear and tear, and replace them when necessary.
• Regularly check all load bearing bolts in the mounting devices.
Potential risk of material damage
Loudspeakers produce a static magnetic field even if they are not connected or not
in use. Therefore make sure when erecting and transporting loudspeakers that they
are not near equipment and objects which may be impaired or damaged by an ex-
ternal magnetic field.
WARNINGS ON THE SPEAKERS BACK PLATE:
THIS EQUIPMENT CAN GENERATE EXTREME SOUND PRESSURE LEVELS THAT CAN LEAD TO
PERMANENT HEARING DAMAGE.
THIS SURFACE MAY REACH HIGH TEMPERATURES WHILE IN USE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
ONLY PERSONAL CERTIFIED TO BE TRAINED BY CADENBACH ACOUSTICS, HAVING PASSED
S1 COURSE SHOULD SETUP THIS SYSTEM, OTHERWISE ANY WARRANTY IS VOID. SEE COR-
RESPONDING MANUAL.
MADE IN GERMANY / EU
www.cadenbach.eu
