Cadel SFERA3 11KW, Installer Manual

Page: 36 / 48

SFERA3 - PRINCE3 - GLOBE AT - SFERA3 PLUS - SIRE3 PLUS - DOGE3 PLUS - PRINCE3 PLUS - ELISE3 PLUS - VEGA AT - TREND AT - VENUS3 PLUS - JOY AT
36
Fig. 86 - Loosen the top screw Fig. 87 - Loosen the bottom screw Fig. 88 - Remove side panels
VENUS3PLUS:
remove the screws from the upper cover and then remove the latter (see
Fig.89
). Remove the 2 upper curve pro-
files (see Fig.90 ) and the sides (see Fig.91 ).
Fig. 89 - Remove the cover Fig. 90 - Removing the upper curve profiles Fig. 91 - Remove side panels
JOY AIRTIGHT
: remove the side screws (see
Fig. 92
and
Fig. 93
), then remove the side completely (see
Fig. 94
).
Fig. 92 - Remove the side screws Fig. 93 - Rear screws removal Fig. 94 - Remove side panels
• Clean the 2 pipes inside the combustion chamber (placed on the top) with a pipe cleaner (see Fig. 95 , Fig. 96 and Fig. 97 ).
• Loosen the two screws from the galvanised panel closing the flue gas compartment, which is found on both sides of the stove
(see Fig. 98 ).
• Clean with a pipe cleaner and suction any ash accumulated inside (see
Fig. 99
and
Fig. 100
).
• After the cleaning the opposite operation is to repeat checking the gasket efficiency and integrity: if necessary provide for its
replacement by an Authorized Technician.