Cadel Martina, Installation, Use And Maintenance Handbook

Page: 75 / 96

MARTINA-SOLARIS-ALESSIA-VANESSA
Pag. 75
5.2. CONTROL PANEL
DISPLAY ELEMENT DESCRIPTION
Buttons P1 and P2
In temperature setting mode they increase or decrease the
thermostat value from a minimum of 6°C to a maximum of 41°C.
Hold down P1 to view the temperature of exhaust fumes. Both
buttons are used for programming.
Button P3
Use to access temperature setting and user and technical
parameters menu.
Button P4 (ON-OFF)
Turns the stove on and off, releases any alarms and quits
programming.
Buttons P5 and P6 Increase and decrease the power from 1 to 5.
Led 1 Hours programming on.
Led 2 If on, auger activated.
Led 3 Receives data from the remote control.
Led 4 Thermostat on.
Led 5 Flashes during temperature setting or when you are in the menu.
Display A
During start-up shows the circuit board status. During operation
shows the power. When altering parameters shows the label for the
parameter in question.
Display B
During start-up shows the circuit board status. During operation
shows the temperature set by the user. When altering parameters
shows the value of the parameter in question.
Picture 11