background image

27

KRISS

3

- TECNA

3

- EVO

3

- ELISE

3

- SHELL

3

- CRISTAL

3

- GLASS - VERVE AT - PRETTY AT - TITANIA AT - VENERE AT - BREEZE AT

Fig. 53 - Remove profiles

Fig. 54 - Unhook the side panels

5.10  KRISS

3

 - CRISTAL

3

 SIDE PANEL DISASSEMBLY 

To access the internal stove parts, disassemble the side panels as indicated below:

•  Remove the door (see 

STOVE DOOR REMOVAL/INSTALLATION a pag. 22

). (NB: You do not have to dissemble the door to 

remove the right side panel).

•  Loosen the 6 back screws (see 

Fig. 55

).

•  Loosen the 4 front screws and remove the side panels (see 

Fig. 56

 and 

Fig. 57

).

•  To assemble proceed in reverse order.

Fig. 55 - Loosen screws

Fig. 56 - Remove screws

Fig. 57 - Remove side panels

5.11  ELISE

3

/SHELL

3

 SIDE PANEL DISASSEMBLY 

To access the internal stove parts, disassemble the side panels as indicated below:

•  Unhook the side panels from low to high (see 

Fig. 58

).

•  For assembly, proceed in reverse order, adjusting the front faceplates both vertically and horizontally to bring them level with 

the side panels (see 

Fig. 59

 and 

Fig. 60

).

Summary of Contents for KRISS3
















































Reviews: