51
WOOD COOKING STOVES
EN
•
Check if the floor has a proper load capacity. If the existing manufacture does not reach this requirement,
proper measures must be taken (for example a load distribution plate).
• If air recirculation hoods are used, they must be suitable to be used over the stove and must be placed
at a distance of minimum 60 cm.
9.4
LEVELLING
All stove models are endowed with adjustable feet which allow a plumbed appliance and a better
adaptability for recess.
Fig. 15 -
Feet adjustment
Stoves with feet for baseboard allow a front feet retraction for a perfect alignment with the baseboard
(for example for the recess between pieces of furniture of a kitchen). For this adjustment it is sufficient to
remove completely the wood drawer by slightly raising it, then loosen the 17-mm bolts placed abowe the
front feet (see
), move the feet and tighten the bolts.
Pay attention to models recessed in a marble top. If the stove needs to be removed
from the furniture, the feet must be lowered till the cooktop is under the marble top
level and now the appliance can be removed.
9.5
ELECTRIC CONNECTION
Some wood stove models are endowed with a forced ventilation system, so they need an electric
connection.
Warning: the appliance must be installed by an authorized technician!
• The electric connection occurs through a cable with plug put in an electric socket which is able to
support charge and tension specific of every model, as described in the technical datas table (see
• The plug must be easily accessible when the appliance is installed.
