Cadel BREEZE AIRTIGHT Installer Manual Download Page 36

Page: 36 / 47

KRISS

- TECNA

- EVO

- ELISE

- SHELL

- CRISTAL

- GLASS - VERVE AT - PRETTY AT - TITANIA AT - VENERE AT - BREEZE AT

6.7

GASKET REPLACEMENT

In case of deterioration of fire door, hopper or fume chamber gaskets, it is necessary to replace them by an autorized technician in

order to guarantee the good running of the stove.

Use exclusively original spare parts.

IN CASE OF ANOMALY

7.1

PROBLEM SOLVING

Before of every Authorized Technician intervention, the same Technician has the duty to check if the parame-

ters of the mother board correspond to those of the table you own.

In case of doubts regarding the use of the stove, please contact ALWAYS the Authorized Technician on order to

avoi irreparable damages!

PROBLEM

CAUSE

SOLUTION

INTERVENTION

The control display

does not switch on

The stove is

without power

supply

Check if the plug is connected.

Burned protection

fuse in the electric

socket

Replace the protection fuses in the electric socket (3.15A-

250V).

Faulty control

display

Replace the control display.

Faulty flat cable

Replace the flat cable.

Faulty electronic

board

Replace the mother board.

Summary of Contents for BREEZE AIRTIGHT
















































Search results

Summary of Contents for BREEZE AIRTIGHT

Reviews:

Related manuals for BREEZE AIRTIGHT

Brands by name

Popular brands

Cadel BREEZE AIRTIGHT, Installer Manual

Search results

Summary of Contents for BREEZE AIRTIGHT

Reviews:

Related manuals for BREEZE AIRTIGHT

Brands by name

Popular brands