CADDX RANGER 7600 Installation Manual Download Page 1

TABLE OF CONTENTS

PAGE

GENERAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

STANDARD AND OPTIONAL PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

FEATURE DEFINITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
 
TERMINAL DRAWING AND SPECIAL NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

TERMINAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

HOW TO PROGRAM THE RANGER 7600  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

KEYPAD PROGRAMMING EXAMPLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

OPTIONAL #8950 PROGRAMMER EXAMPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

PROGRAMMING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-28

PROGRAMMING WORKSHEETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-32

APPENDIX 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

APPENDIX 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

LOCAL TELEPHONE COMPANY INTERFACE INFORMATION . . . . . . . . . . . . . . . . . 35

NOTES

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

SPECIFICATIONS & WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

RANGER 7600 

DOWNLOADABLE CONTROL COMMUNICATOR  

INSTALLATION MANUAL

CADDX CONTROLS,  INC. 

GLADEWATER, TEXAS

800-727-2339

Summary of Contents for RANGER 7600







































Reviews: