4
AUTOMATIC BYPASS OPTION
If checked, the "AUTOMATIC BYPASS" option has been selected by your installing company.
With this feature enabled, all interior zones will automatically bypass if you "ARM" your security
system and do not leave through a designated entry/exit door. The "AUTOMATIC BYPASS"
will occur at the end of the exit delay time. At this time, all bypassed "ZONE" lights will become
illuminated. With the interior zones bypassed, occupants are allowed the freedom of movement
inside of the Home/Business while the security system is "ARMED".
INSTANT / DELAY OPTION
If checked, the "INSTANT" option has been selected by your installing company. With this
feature enabled, if you do not wish to have a delay on your entry/exit doors, this can be
accomplished by pressing the [
r
] key on your keypad while the system is "ARMED". At this time,
the "INSTANT" light will illuminate and there will be no entry delay when the entry/exit doors
are opened. Any time the "INSTANT" light is on and the exit delay has expired, the opening
of an entry/exit door will produce an immediate alarm, making this feature ideal when a high
level of security is desired, and no authorized entries are anticipated. By pressing the [
r
] key
again, the "INSTANT" light will turn off, and an entry delay will be present on designated
entry/exit doors.
NOTE: Your installing company may have programmed the "INSTANT" option to occur in
conjunction with the "AUTOMATIC BYPASS" feature. In this case, the "INSTANT" light and the
bypassed "ZONE" lights will become illuminated at the end of the exit delay. If this occurs, you
still have the ability to turn the "INSTANT" feature off, and/or on by pressing the [
r
] key.
TURNING ON THE CHIME FEATURE
Your Security Control Center will operate in the "CHIME" mode to allow the monitoring of
selected perimeter doors and windows and designated interior areas while the Security System
is not armed.
While in the "CHIME" mode, the opening of perimeter doors or windows, or a violation of
designated interior areas will cause the Keypad Control to sound (beep) for one second.
To use this feature, press the first digit of the Master Code. In five seconds the Keypad Control
will sound (beep), indicating that this feature has been enabled. To turn this feature off, press
the first digit of the Master Code. In five seconds the Keypad Control will sound (beep),
indicating that this feature has been turned off.
KEYPAD ACTIVATED PANIC/HOLD-UP ALARM
If checked, this feature has been selected by your installing company. If so, when the star [
r
]
and pound [#] keys are pressed at the same time for one second, a local audible alarm will
sound. If your system is connected to a monitoring center, an emergency report could be
transmitted to that center. These keys should only be pressed in an emergency situation
requiring immediate response by law enforcement personnel.
PLEASE NOTE: Some Panic/Hold-Up alarms are programmed to be silent at the protected site
while reporting an alarm to the monitoring center. Check with your installing company to
determine how your security system will respond to the Panic/Hold-Up activation.
Summary of Contents for 8600
Page 9: ...9 SYSTEM NOTES...
