1
1
1. Introduction
• The pizza stone is made from durable Cordierite and can withstand temperatures up to 300°C.
• The CADAC pizza stone can be used on a wide variety of appliances, including gas and electric.
2. Using the Pizza Stone
• It is recommended to use the pizza stone in conjunction with the pan supplied. This will protect the stone.
• Please note, these are only guidelines and may differ by product.
Instructions:
• Place the pizza stone in BBQ.
• Pre-heat on Maximum with the dome on (3-5 minutes).
• Once pre-heated, sprinkle cake flour on the pizza stone. This will assist in preventing the crust from burning and sticking to the stone.
• Immediately, set the burner to LOW.
• Place pizza centrally on the pizza stone.
• Wait approximately 8 – 10 minutes. Times may vary.
• When the pizza is done, remove from BBQ. Be careful as the pan will be hot. The use of oven gloves is recommended.
• Remove the pizza and leave the pizza stone to cool down gradually.
GB
PIZZA STONE PRO 40
• Product code: 98433
• Size: Ø33cm x 1.2cm thick
• Can fit onto the following CADAC products:
•
Grillo Chef 2 (Model: 5650)
•
Grillo Chef (Model: 5600)
•
Citi Chef 40 (Model: 5610)
•
Citi Chef 40 FS (Model: 5615)
•
E Braai (Model: 5840)
•
Grillogas (Model: 740)
PIZZA STONE PRO 30
• Product code: 98425
• Size: Ø25cm x 1.2cm thick
• Can fit onto the following CADAC products:
•
Safari Chef 2 (Model: 5640)
PIZZA STONE PRO 50
• Product code: 98436
• Size: Ø36cm x 1.2cm thick
• Can fit onto the following CADAC products:
•
Carri Chef 2 (Model: 8910)
•
Citi Chef 50 (Model: 20162)
3. Components
Pizza Stone
Pan
503-0791 LEV1 (98425, 98433, 98436) Pizza Stone Pro - User Manual (All).indd 1
2020/10/17 10:09:11
