Page
7
of
9
DOC02-CDC MC Dante Issue C - November 2016
Appendix B: Audinate Dante Controller Details
This program may be downloaded from the Audinate website.
Link:
Dante Controller Software
It is free but you may need to register to get a copy.
Once installed the program automatically searches out any Dante enabled devices connected to the
PC and then allows you to configure each device.
There are
three
main screens that need to be considered.
Routing Screen
The example below shows the two Dante ports found on a single CDC MC Dante unit.
Note how the matrix allows connections to be set up between ports.
