CM-SR644024_09-11-2023_Rev-25
Page. 55
Unit Factory Reset
The SR stage racks may, on the rare occasion, need a factory reset as the screen may have become
locked and the menu has become inaccessible. This could be a result of a failed firmware upgrade.
A factory reset can be done, without need of accessing the
Reset Rack Device
function, by following the procedure below.
Unit Factory Reset Procedure
1. Power off the unit (ideally discount from the power)
2. Reconnect the power
3. Press and hold the MENU [1] and BACK [2] buttons on the front panel
4. Now power up the unit
– still holding the MENU and BACK buttons
5. Wait for the following screen to appear before releasing the MENU and BACK buttons:
36: Recall defaults
– the unit will now continue and reset to factory defaults
6. The unit will now go through
Reset Rack Device
process to return it to factory defaults
7. When the unit has reset it will display the
Main Menu
:
37: Unit has finished resetting to factory defaults