9
27/11/2013
15:50
9 Setting up V6 for the first time
9.1 Installing Batteries
(Fig. 7)
(Fig. 8)
Open the battery door by pushing it backward. Flip open the latch and insert two AA
batteries in correct polarities. Then close the battery door by pushing it to the front.
9.2 Hot Shoe Lock Lever
(Fig.
9)
(Fig.
10)
To mount the V6 on camera’s hot shoe mount:
1. Turn the lock lever of V6 in the direction opposite to that indicated by (
Æ
LOCK
).
2. Slide the V6 bottom hot shoe into the camera’s hot shoe.
3. Turn the lock lever of V6 in the direction of (
Æ
LOCK
) to lock it.
4. When releasing V6 from camera’s hot shoe, turn the locking lever opposite to the
direction of (
Æ
LOCK
). Otherwise, the hot shoe will be damaged.
9.3 TX and RX
Cactus V6 is a wireless transceiver that is capable of transmitting and receiving radio
signals. Set the V6 transceivers to the correct mode (Transmitter to “TX”, Receiver to “RX)).
This will automatically power on the transceivers.