Cactus Technologies, Limited
1.Introduction to Cactus Technologies
®
Commercial Grade -240S Series SSD
Products
Features:
·
Solid state design with no moving parts
·
Available in industry standard 2.5” form factor (7mm for 512GB and below, 9.5mm for
1TB)
·
Capacities from 16GB to 1TB
·
Compliant with Serial ATA 3.1 specifications
·
ATA-8 ACS2 command set compatible
·
Supports Serial ATA Generation I/II transfer rate of 1.5/3.0/6.0 Gbps
·
Supports ATA SMART Feature Set
·
Supports ATA Security Feature Set
·
Supports Host Protected Area Feature Set
·
Supports Data Set Management (TRIM)
·
Supports NCQ w/ max. queue depth of 32
·
Supports DevSLP
·
ECC capable of correcting up to 66 bit errors per 1KB
·
Enhanced error correction, < 1 error in 10
14
bits read
·
Voltage support: 5.0V±10%
Cactus Technologies
®
Commercial SSD is a high capacity solid-state flash memory product
that complies with the Serial ATA 3.1 standard and is functionally compatible with a SATA
hard disk drive. Cactus Technologies
®
Commercial SSD provide up to 1TB of formatted
storage capacity.
Cactus Technologies
®
Commercial SSD product uses high quality MLC NAND flash memory
from well known vendors, such as Toshiba Corporation. In addition, it includes an on-drive
intelligent controller that manages interface protocols, data storage and retrieval as well as
ECC, defect handling and diagnostics, power management, and clock control. The
controller’s firmware is upgradeable, thus allowing feature enhancements and firmware
updates while keeping the BOM stable.
Cactus Technologies Limited
Commercial Grade -240S Series SSD Product Manual
v1.5
5
