6
On/Off Switch and Flash Test Operation
To switch on the flashgun, slide the power switch to "ON"
position. The "READY" indicator will light up as soon as
the flash is ready for shooting. Press the Test button to
ensure the flashgun works properly.
If the flashgun discharges completely, wait until the
"READY" indicator glows again. To switch off, slide the
power switch to "OFF" position.
Illumination of LC Display
LC display is used to show general information of the
camera and current status of the flashgun. LC display will
be illuminated for about 5 seconds every time the "LIGHT"
key is lightly tapped.
Shooting
Automatic Flash Sync Speed Control
When the flashgun is ready, the camera will automatically
adjust flash sync speed from program mode or
aperture-priority mode selected. The sync speed depends
on camera model and usually ranges from 1/30 sec to
1/250 sec. When a shot has been taken, "OK" symbol
flashes shortly on the LC display to confirm correct
exposure.