5
13. LOCK BUTTON (hidden)
Press the LOCK button and all the current settings are locked. The
wire controller will not accept any operation except the LOCK
button. Use LOCK when you want to prevent the setting from
being changed. Press the LOCK button again to cancel the LOCK
mode.
USING METHOD
AUTOMATIC OPERATION
Connect power to the unit and the indoor operation lamp flashes.
1. Press the MODE button and select AUTO.
2. Press
”
Y
”
and
”
B
”
, set the temperature you want, generally it
is around 62F (17C)~88F (30C).
3. Press the ON/OFF button and the operation lamp lights. The air
conditioner operates in the AUTO mode and the indoor fan mode
is AUTO and can not be changed. AUTO displays on the LCD.
Press the ON/OFF button again to stop.
4. The ECONOMY operation is valid in the AUTO mode.
COOL/HEAT/FAN MODE OPERATION
1. Press the MODE button, select COOL, HEAT or the FAN
ONLY mode.
2. Press the temperature adjust button to select the setting
temperature.
3. Press the FAN SPEED button to select the speeds:
HIGH/MID/LOW/AUTO.
4. Press the ON/OFF” button and the indoor unit operation lamp
lights and operates in the selected mode. Press the ON/OFF button
again and it stops. Remark: When in the FAN mode the
temperature can not be set.
DRY OPERATION
1. Press the MODE button and select the DRY mode.
2. Press the temperature adjust button to select the setting
temperature.
3. Press the ON/OFF button and the indoor unit operation lamp
lights and it works in the DRY mode. Press the ON/OFF button
again and it stops working.
4. In the DRY mode the ECONOMY operation and fan speed are
ineffective.
TIMER SETTING
Timer on only
1. Press the TIME ON button and it displays SET on the LCD
along with H and ON to indicate it is waiting for the TIMER ON
setting.
2. Press the TIMER ON button repeatedly to adjust the time
setting.
3. Press this button and hold to increase the time by 0.5h. After
10h, the time increases by 1h.
4. After setting 0.5 second, the wire controller sends the TIMER
ON information and it is finished.
Timer off only
1. Press the TIME OFF button and it displays SET on the LCD
and H and ON to indicate it is waiting for the TIMER ON setting.
2. Press the TIME OFF button repeatedly to adjust the time setting.
3. Press this button and hold and the time increases by 0.5h. After
10h, the time increases by 1h.
4. After setting 0.5 second, the wire controller sends the TIMER
OFF information and it is finished.
TIMER OFF AND TIMER OFF BOTH
1. Set the TIMER ON time as detailed in the corresponding step 1
and 2.
2. Set the TIMER OFF time as described in the corresponding
step1 and 2.
3. The TIMER OFF time must be longer than the TIMER ON
time.
4. .05 seconds after setting, the wire controller sends the
information and the setting is finished.
CHANGE TIMER
If you need to change the timer’s time, press the corresponding
button to do so. To cancel the timer, change the time to 0.0.
NOTE
: The timer’s time is relative and it delayed after the setting
time (for example, setting time is 8:05 A.M). So when the timer is
set, the standard time can be adjusted.
TECHNICAL INDICATION AND REQUIREMENT
EMC and EMI comply with the CE certification requirements.
