10
SPRINT INFLATION SYSTEM
The Sprint inflation system is a simple to use feature to quickly inflate your kite to an even pressure. The Sprint system uses a
single inflation point to connect your high volume, two way Cabrinha pump. As you pump your kite with air, all struts and your
leading edge inflate quickly and simultaneously to the desired pressure. The supplied leash pump and threaded valve connection
keeps your kite under control even when pumping up directly in the wind.
Once the kite is pumped you can choose to clip off the air to the struts. This way if you damage a strut while in use, the rest of
the kite will maintain its pressure. At the end of the session you can choose to deflate your kite completely by disengaging the
strut clips.
You can also keep your struts inflated and put your kite away rolled up so that the next session will take just minutes to set up.
The Upper Section is
The Inflation Cap
The Lower Section is
the Release Valve
S E T U P
INFLATING THE KITE
3
2
1
CK07SwitchbladeUserManual.indd 10
8/10/06 3:40:34 AM
