SET UP 2 - INFLATING YOUR KITE
STEP 2.4 - DEFLATING THE LEADING EDGE
DEFLATING THE LEADING EDGE
To deflate the Leading Edge, you must unscrew the release valve and not the
inflation cap. The release valve is the lower portion of the AIRLOCK.
After deflating, clear the valve of any sand or debris; then seal the valve before
stowing kite to prevent debris from getting inside internal bladder.
Important Note
When closing valve on deflated kite, hold bladder in place to prevent twisting the
bladder. Do not over tighten valve when kite is deflated. You may tighten it further
when kite is partially inflated again.
