1. Video Impedance
75 ohm
2. Video Bandwidth
>10MHz
3. Video Gain
2V unterminated 1V
4. Video Insertion Loss
50Hz to 10MHz <40dB
5. In to Out Isolation
50Hz to 10MHz 32dB port to port
6. Out to In Isolation
50Hz to 10MHz 60dB
7. Return Loss
50Hz to 10MHz 60dB
8. Audio Response
>100kHz
Audio
9. Audio Input Impedance
22K ohm
10. Audio Output Impedance
1K ohm
11. Gain
Unity
12. THD
0.05% @1V input level
13. Frequency Response
20Hz to 100kHz
14. Channel Separation
>75dB@1kHz
15. In to Out Isolation
60dB
16. Out to In Isolation
60dB
17. Signal to Noise
100dB@2V (out)
18. A/V Input/Output Jacks
RCA type phone jacks
General
19. Power
15V DC@400mA with 2.5mm power jack
20. Dimensions
INSTALLATION
1. UNPACKING and HANDLING
Each unit is shipped assembled and factory tested. Ensure that all accessories are removed
from the container before discarding packing material
2.
MECHANICAL
INSPECTION
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is
clean, and no connectors are broken, damaged, or loose. If equipment appears to be
damaged or defective please contact your distributor or Cabletronix at 1-610-429-1511 for
assistance.
3.
PRODUCT
DIAGRAM
INSERT IMAGE and CONNECTIONS HERE
4.
HARDWARE
CONNECTIONS
a. Connect the signal source’s composite video output to the distribution amplifier’s
composite video input.
b. Connect the signal source’s audio L/R output to the distribution amplifier’s audio
L/R input.
c. Connect your TV or monitor’s composite input to the distribution amplifier’s
composite video OUTPUT 1, OUTPUT 2, OUTPUT 3, or OUTPUT 4.
d. Connect your TV or monitor’s audio L/R input to the distribution amplifier’s audio
L/R output.
