LANVIEW LED SIGNALS
Page 4-2
c. Check that the MIMs in the MMAC are grouped together
according to network type and ring capacity. For example,
all Ethernet MIMs together, all port switching Token Ring
MIMs together, all single-ring Token Ring MIMs together.
4. Confirm that the maximum cable length for EACH station and
the maximum number of stations are not exceeded.
When these checks have been successfully cleared, the TRXMIM is
ready for normal operation. If further problems are encountered,
contact Cabletron Systems Technical Support.
4.2 LANVIEW LED SIGNALS
LANVIEW is Cabletron Systems’ built-in visual diagnostic and
status monitoring system. Using LANVIEW, network trouble
shooting personnel can quickly scan the LANVIEW LEDs (shown
in Figure 4-12) to determine network status, diagnose network
problems, and isolate faulty nodes or trunk segments.
Figure 4-12. TRXMIM LANVIEW LEDs
TRXMIM-24A
1
X
13
X
1 2
6
1 1
5
1 0
4
9
3
8
2
7
1
IN USE
A U X 2 - 1 6 M b
A U X 1 - 1 6 M b
R I N G 4 - 1 6 M b
R I N G 3 - 1 6 M b
R I N G 2 - 1 6 M b
R I N G 1 - 1 6 M b
BYP
IN USE
IN USE
IN USE
IN USE
M G M T
ERR
- P O R T S -
2 4
2 3
2 2
2 1
2 0
1 9
1 8
1 7
1 6
1 5
1 4
1 3
IN USE
