INSTALLING THE TRFOT-3
Page 3-6
3.6
MOUNTING THE TRFOT-3
Use the cable mounts, Tie Wraps, and Velcro Strips included with the
TRFOT-3 to wall-mount the unit.
1.
Remove the tape from the adhesive backing on the Velcro strips.
2.
Place one Velcro half on the TRFOT-3 and the other half on the
mounting surface.
3.
Press firmly on each Velcro strip, then press the TRFOT-3 onto the
mounting surface.
4.
Secure the TRFOT-3’s cables to the wall using the adhesive backed
cable mounts and tie wraps as shown in Figure 3-5.
Figure 3-5. Mounting the TRFOT-3
Cable Mounts and Tie Wraps
TX
RX
802.5 TOKEN RING COPPER
TO
SINGLE MODE
FIBER OPTIC TRANSCEIVER
WITH
LANVIEW
®
P
W
R
C
U
F
O
LNK
POWER REQUIRED: 9-12V ----,700mA MAX
DATA CAPABILITY: 4/16Mb/s AUTO SENSING
UL
SA
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
SN
A B C D
POWER
INPUT
TRFOT-3