Cabletron Systems SWPIM-T1, Installation Manual

Page: 27 / 34

SWPIM-T1 Installation Guide A-1
APPENDIX A
SPECIFICATIONS
This section describes the environmental specifications and safety and
approval requirements for the SWPIM-T1. Cabletron Systems reserves
the right to change these specifications at any time without notice. Pinouts
and the T1 cable are also listed in this appendix.
A.1 PHYSICAL PROPERTIES
A.2 NETWORK INTERFACE
The connector for the RJ48 network port can be seen in Figure A-1 :
Figure A-1 RJ48 Pinout
Dimensions: 1.91 H x 5.40 W x 19.05 D (cm)
0.75 H x 2.125 W x 7.50 D (in)
Weight (Unit): 0.068 kg (0.15 lb)
Nominal current draw on +5V
supply from host platform:
150 mA
MTBF (Predicted): 10,119,716 hours
1 2 3 4 5 6 7 8
strj45